Star Trac 5700 User Manual download pdf (Page 21)

Page 21 STAR TRAC GROUP CYCLES OWNER’S GUIDE

Chain Replacement

CAUTION: Do not get your fingers caught in the chain or sprockets.

1. Remove the chain guard by unscrewing the chain guard screws.

2. Apply tension to the brake knob by turning it all the way clockwise so the

flywheel does not turn.

NXT PRO/ ELITE

3. Using the 16mm or 5/8” socket and socket wrench

loosen the axle nuts on the sides of the flywheel.

4. Using the 10mm open end wrench, loosen the lock

nuts on the chain adjustment screws.

5. Loosen the adjustment bolt to allow the chain to go

very slack.

6. Using the chain break tool cut the chain open and

remove the chain from the bike.

7. Put the new chain on the front sprocket and over the

crank arm but not onto the large rear sprocket if the

chain contains a master link, insert the master link

and tighten it making sure the two links are joined

and are flexible.

8. Lift the chain up onto the rear large sprocket.

9. Proceed to chain adjustment.

1 2 ... 16 17 18 19 20 21 22 23

No comments

Star Trac 5700 User Manual Page 21